TTO thermal transfer coding machine:Basic operation of Weidijie 6230 machine
Replace the language in the tool:Replace the language in the tool:
Then enter the settings, point control, there will be language settings:
The first one in the settings is the nozzle, and there are consumables and control:
There are commonly used settings such as horizontal scale, vertical ruler, print delay, printing speed, etc. in the nozzle head:
Back to the previous step, in the consumables, the color bandwidth, the color of the ribbon, and the color strap:
Then there are language, screen correction, date time, default font size, etc. in the control, you can change according to the needs:
Then talk about the diagnosis in the tool, there is also a nozzle in it:
Enter the input of the nozzle:
There is an external 1 external 2, only offline or running status can be set:
Enter GM:
There are code machine mode, printer direction, print mode, print test file:
There are more commonly used event logs. You can see what time to report and what police:
There are hidden states, hidden alerts, hidden warnings, or export to USB:
You need to insert USB, where the location is:
Take a look at the diagnostic consumables, there are carbon belt diameter, carbon band fertilizer diameter, tension tension, printing mode:
Then see the control in the diagnosis, there is no need to change the basics inside:
Take a look at the three on the left side of the homepage:
Here is the percentage of the ribbon. If it is just installed, it is 100%. It shows green, and it will display yellow as below 50%. It becomes red below 20%:
Then we look at the file:
Select the required and then click normal, you will start printing, or you can continue to edit:
Click on this Internet to indicate that the font language can be set:
If you delete the information, click into the database of the tool, and then enter the interior to edit and delete: